Envelope Punch Board – Page 4 – Carol Payne Stamps

Tag: Envelope Punch Board

Stampin’ Up! Petal Parade Sale-a-bration Sneak Peek, the BOX!

Posted on December 21, 2013 by Carol Payne

Hey there! Finally accomplishing some things that have really been needing attention today. Still have a bunch of wrapping to do, but my girls are planning to help me tomorrow, so there's hope!

As promised, here is the box I created to put yesterday's calendar in. I used the Envelope Punch Board for my scoring:

I used Crisp Cantaloupe for the box, stamping it all over with one of the 2014 Sale-a-bration Petal Parade stamps and one from the Occasions Catalog, Petite Petals with Crisp Cantaloupe ink.

I used the Sweet Sorbet Designer Paper for the belly-band. I used Crisp Cantaloupe, Tangerine Tango, Pistachio Pudding, and Basic Black Stampin' Write Markers to ink up the single stamp called People Like You. After stamping on Whisper White cardstock, I cut it out with a Deco Label Framlit, then mounted it on a Pistachio Pudding layer also cut with the next-size larger Deco Label Framelit.

I knew I needed a fairly deep box to be able to put the Sweet Sorbet easel calendar in, and this box worked perfectly!

Now I just wish I had time to make about a dozen of these for Christmas gifts! Why, oh why do I always get my best inspiration at the last minute???

That's all for now. The item codes for the Sweet Sorbet Designer Paper and the Petal Parade stamp set won't go live until Sale-a-bration starts on January 28th, but the People Like You stamp set will be available starting January 3rd! Come stamp with all of these fun new products at my Stampin' in the New Year Stamp-a-Stack on January 1st, 3rd, and 4th!

You can shop now in my Online Store for all the Holiday Catalog products that are still available (most of which will never be available again, unless they show up someday on the Clearance Rack!), as well as Annual Catalog, Photopolymers, and Best of 25 Years stamps: www.carolpayne.stampinup.net

Until tomorrow, have a Stampingrox! day!

All products used are ©Stampin'Up!™1990-2013

Stampin’ Up! Petal Parade Sale-a-bration Sneak Peek, the BOX!

Posted on December 21, 2013 by Carol Payne

Hey there! Finally accomplishing some things that have really been needing attention today. Still have a bunch of wrapping to do, but my girls are planning to help me tomorrow, so there's hope!

As promised, here is the box I created to put yesterday's calendar in. I used the Envelope Punch Board for my scoring:

I used Crisp Cantaloupe for the box, stamping it all over with one of the 2014 Sale-a-bration Petal Parade stamps and one from the Occasions Catalog, Petite Petals with Crisp Cantaloupe ink.

I knew I needed a fairly deep box to be able to put the Sweet Sorbet easel calendar in, and this box worked perfectly!

Now I just wish I had time to make about a dozen of these for Christmas gifts! Why, oh why do I always get my best inspiration at the last minute???

Until tomorrow, have a Stampingrox! day!

All products used are ©Stampin'Up!™1990-2013

Stampin’ Up! Christmas Catch Up!Recap!

Posted on December 13, 2013 by Carol Payne

Hey there! Messy weather here today. My class had to be cancelled due to the yucky weather. Such a bummer. Of course, that also means I have a bunch of projects that don't get to be made by anyone. (insert sad face)

Since I have so many pretty project packets left over, I am offering them to you, completed, of course. Call, text, or email me your order, or click HERE to go to my online store and place an order of at least $25, and I will mail you four completed projects! You choose the ones you want! Orders must be placed by Midnight, December 17th, which is the last day to order for delivery before Christmas.

Here's a quick over-view of the projects to choose from:

Be Merry Gift Card Holder above

Be Merry Tags below:

The Festive Flurry Ornament shown on the left:

Best of Christmas Luminaria:

Best of Christmas Ornament:

Best of Snow Hot Cocoa Pouch:

Envelope Punch Board File Folder Gift Card Holder:

Envelope Punch Board Treat Box:

Envelope Punch Board Treat Pouch:

Gift Bow Die Angel:

Santa Gift Card Holder:

Wonderful Blessing Ornament:

Contact me ASAP or go place your order on my webiste: www.carolpayne.stampinup.net

That's all for now! Until tomorrow, have a Stampingrox! day!

All products used are ©Stampin'Up!™1990-2013

Stampin’ Up! Christmas Catch Up!Recap!

Posted on December 13, 2013 by Carol Payne

Here's a quick over-view of the projects to choose from:

Be Merry Gift Card Holder above

Be Merry Tags below:

The Festive Flurry Ornament shown on the left:

Best of Christmas Luminaria:

Best of Christmas Ornament:

Best of Snow Hot Cocoa Pouch:

Envelope Punch Board File Folder Gift Card Holder:

Envelope Punch Board Treat Box:

Envelope Punch Board Treat Pouch:

Gift Bow Die Angel:

Santa Gift Card Holder:

Wonderful Blessing Ornament:

Contact me ASAP or go place your order on my webiste: www.carolpayne.stampinup.net

That's all for now! Until tomorrow, have a Stampingrox! day!

All products used are ©Stampin'Up!™1990-2013

Stampin’ Up! Envelope Punch Board File Folder Giftcardholder Tutorial and How to Tie a “Knot Bow”!

Posted on December 9, 2013 by Carol Payne

Hey there! I'm a little late posting today, but I'm finishing up the final projects for my Christmas-Catch-Up Class and Customer Appreciation and wanted to share this tutorial with you for how to make this file folder gift card holder using the Stampin' Up! Envelope Punch Board:

· Stamps – Wishing You #131748 wood-mount $14.95 #131751 clear-mount $11.95

· Card Stock – Crumb Cake, Season of Style Designer Paper, Whisper White

· Ink: Cherry Cobbler

· Misc. – SNAIL Adhesive, Envelope Punch Board #133774 $19.95, 1 ¾” Circle Punch, Stampin’ Dimensionals, Paper Snips, Glue Dots, Season of Style Designer Washi Tape, Crumb Cake Notecard Envelopes #131528 $5.50 (40 per pkg), Cherry Cobbler 1” Stitched Edge Ribbon

Envelope Punch Board File Folder Gift Card Holder Tutorial

C Crumb Cake dimensions: 4 3/4" x 5", scored at 2 1/4 along the 5" side. This will make the front flap of your file folder narrower than the back flap.

Adhere 2 1/4" x 4 3/4" piece of Season of Style Designer Paper on corresponding flap with SNAIL.

Adhere Season of Style Designer Washi tape to the opposite flap.

1. Line up the left corner of the paper with the left edge of the Envelope Punch Board punch as shown.

Punch once to start the curve of the folder tab.

2. Slide paper over to the 2 inch mark and punch again.

3. Line up the center of the punched "valley" with the trimmer blade track. Cut up from the center to the

top of the paper as shown.

4. Smooth out any rough edges with your fingernail or Paper Snips.

5. Repeat these steps for the back flap of folder, turning the paper over so you will be punching the

opposite end.

6. Round remaining corners of the file folder with the corner-rounder punch of the outside edge of

the punch board.

7. This is your file folder card open and flat;

HOW TO TIE A PRETTY KNOT "BOW"

1. Wrap right end of ribbon over left end. Pull left end up and right end down tightly (this is the beginning of the phrase you have probably hear before " right over left, left over right …")

2. Bring top ribbon end down over bottom ribbon end as shown:

3. Wrap top end down and around bottom end as shown. Pull top end through

the loop you created. Pull ends tightly.

4. Trim ends at an angle with Craft Scissors.

That's all for now! Later than normal, but hopefully worth the wait!

Click HERE to go to my Online Store to order your Envelope Punch Board or other stampin' supplies! There's still time to receive your order before Christmas!

Until tomorrow, have a Stampingrox! day!

All products used are ©Stampin'Up!™1990-2013

Stampin’ Up! Envelope Punch Board File Folder Giftcardholder Tutorial and How to Tie a “Knot Bow”!

Posted on December 9, 2013 by Carol Payne

· Stamps – Wishing You #131748 wood-mount $14.95 #131751 clear-mount $11.95

· Card Stock – Crumb Cake, Season of Style Designer Paper, Whisper White

· Ink: Cherry Cobbler

Envelope Punch Board File Folder Gift Card Holder Tutorial

C Crumb Cake dimensions: 4 3/4" x 5", scored at 2 1/4 along the 5" side. This will make the front flap of your file folder narrower than the back flap.

Adhere 2 1/4" x 4 3/4" piece of Season of Style Designer Paper on corresponding flap with SNAIL.

Adhere Season of Style Designer Washi tape to the opposite flap.

1. Line up the left corner of the paper with the left edge of the Envelope Punch Board punch as shown.

Punch once to start the curve of the folder tab.

2. Slide paper over to the 2 inch mark and punch again.

3. Line up the center of the punched "valley" with the trimmer blade track. Cut up from the center to the

top of the paper as shown.

4. Smooth out any rough edges with your fingernail or Paper Snips.

5. Repeat these steps for the back flap of folder, turning the paper over so you will be punching the

opposite end.

6. Round remaining corners of the file folder with the corner-rounder punch of the outside edge of

the punch board.

7. This is your file folder card open and flat;

HOW TO TIE A PRETTY KNOT "BOW"

1. Wrap right end of ribbon over left end. Pull left end up and right end down tightly (this is the beginning of the phrase you have probably hear before " right over left, left over right …")

2. Bring top ribbon end down over bottom ribbon end as shown:

3. Wrap top end down and around bottom end as shown. Pull top end through

the loop you created. Pull ends tightly.

4. Trim ends at an angle with Craft Scissors.

That's all for now! Later than normal, but hopefully worth the wait!

Click HERE to go to my Online Store to order your Envelope Punch Board or other stampin' supplies! There's still time to receive your order before Christmas!

Until tomorrow, have a Stampingrox! day!

All products used are ©Stampin'Up!™1990-2013

Stampin’Up! Envelope Punch Board Gift Card Holders!

Posted on December 6, 2013 by Carol Payne

Hey there! I have a couple more Gift Card Holders to share with you today. These are for the Ina Craft Fair Saturday, so I used some of my stash of retired cardstock and designer paper.

This little cute guy is punched with the 2 1/2", 1 3/4", and 1 1/4" Circle Punches. His face and arms are stamped with Snow Day stamp set stamps. I created the belly band from and stamped the "warm wishes" on retired designer paper, and the gift card base with retired Confetti White cardstock.

On the back flap I stamped and punched out an image from the Very Merry Tags stamp set with the 7/8" Scallop Circle Punch. I haven't stamped directly on designer paper very much, but I really like the look!

Inside the flap I stamped the "to: from:", also from Very Merry Tags. The entire gift card holder was embossed with the Perfect Polka Dots Textured Impressions Folder.

I also created this simple Santa gift card holder with the Envelope Punch Board. I used Real Red 12"x12" Core'dinations cardstock because it is a great deal right now on the Clearance Rack. I accented the Basic Black bellyband with a Silver Glimmer faux "buckle" created by punching with the Petite Curly Label Punch first, then punching the Curly Label Punch around the negative space left from the first punch. The "HO HO HO" is from the Naughty & Nice This & That Rotary Stamp in the Holiday Catalog, punched with the Word Window punch.

Inside the flap I used the same "to: from:" from the Very Merry Tags set, stamped in Jet Black StazOn.

The dimensions for these giftcard holders are 6" x 6". To get the elongated shape, I started by putting a corner of the square at 3"on the Envelope Punch Board, punching, then scoring with the scoring tool included with the board. I turned the square a quarter turn, then put the new corner at 2 5/8", punching, then scoring. I turned the square a quarter turn again, then put the third corner at 3" again, punching, and then scoring. I turned the square a quarter turn one last time, put the fourth corner at 2 5/8" again, punched, and scored. I then snipped out the excess slivers of cardstock from along the sides of the flaps (once you have punched & scored with the Envelope Punch Board you will know what I am referring to)

The pocket for the gift card is secured with Glue Dots on the 3 closed flaps, leaving one flap un-glue-dotted to serve as the opening flap.

The dimensions for the bellyband is 1" x 8 1/2". I wrapped the strip of paper around the pocket, then secured it to itself with Glue Dots.

The snowman & the belt buckle are adhered to the bellybands with Stampin' Dimensionals.

While I am at it, let me give you the dimensions for cutting and scoring the Envelope Punch Board Treat Pocket I showed you HERE

Winter Frost Designer Paper is 4" x 4' square, scored and punched with all four corners at 1 3/4".

That's all for now! You can order all of the supplies to make today's projects (with the exception of the retired cardstock and designer paper) from my Online Store:

www.carolpayne.stampinup.net